Mark Dead-Center. Skip the Live Wires.
Glide it across the wall, watch the ring turn red, and mark the stud center straight through the tool.
Claim 50% Off — Order NowIn Stock – Free 5–7 Day US Shipping
Built for TV mounts, floating shelves, and heavy bookcases, and for anyone tired of patching drywall.
When the ring turns red, put your pencil through the 14mm center hole. The mark lands exactly where the sensor reads the stud center.
Two front buttons cover wood studs (20mm Exact, 38mm Deep) plus steel, copper, and live AC cable.
The 2.1-inch LCD shows depth in cm, signal percentage, battery level, and an Edge-to-Center bar graph.
A built-in 300mAh lithium battery charges over USB-C and shuts off after five minutes, so it's ready next time.
Hold the scanner flat on the wall and press the wood button or the metal/AC button. The screen confirms Auto Cal OK in about a second.
Slide it slowly across the wall. The sensor reads studs, pipes, and live cable behind the drywall while the signal bar and depth readout climb.
When the ring glows red and the bar graph closes on center, mark the wall through the center hole. That's your drill point.
Limited-Time Direct Offer — Save 50% Today
3-mode digital wall scanner that finds wood studs, metal, and live AC wires, then lets you mark dead-center through an illuminated hole.
Backed by our 30-Day Money-Back Trial & Full Cosari Guarantee.
$59.99 $119.99 Free Tracked Shipping (5–7 Days) Included
In Stock: Delivers in 5–7 Business Days. Free insured US delivery with tracking.
30-Day Money-Back Guarantee plus a full 2-Year Warranty.
Quantity
What it does: The Cosari WallScan WD-01 Pro finds wood studs, steel and copper, and energized AC cable behind drywall, plaster, and paneling. A tri-color ring and backlit LCD show edge and center, and you mark the drill point through the 14mm hole in the middle.
Who it's for: Homeowners and DIYers mounting TVs, shelves, mirrors, cabinets, and bookcases, plus remodelers who want a pocket-size scanner that also warns about live wires.
Good to know: Calibrate with the scanner flat on the wall. Use Deep mode on older lath-and-plaster walls. The beep stays on while you hold over center, and one press mutes it.
Free 5–7 Day US Shipping: Every order ships free with full tracking and delivers in 5 to 7 business days.
30-Day Trial: Try it at home for 30 days risk-free. Need help? Email us anytime at support@buycosari.com.
2-Year Warranty: If anything goes wrong within 2 years, we replace it free of charge or refund your order in full.
Green means you're approaching, yellow means you've hit an edge, red means dead center. You can read it from across the room.
It calibrates when placed on the wall, and the soft flocking back slides over fresh paint without scuffing.
Silence the buzzer with one press and keep a steady hold with the ridged dark-gray side grips.
Cosari WallScan WD-01 ProStandard Competitors
| Feature | Cosari WallScan WD-01 Pro | Standard Competitors |
|---|---|---|
| Finds the stud center | Yes, mark through the 14mm hole | Find two edges, guess the middle |
| Live AC wire alert | Yes, up to 50mm | Often missing |
| Metal pipe and rebar depth | Up to 120mm steel, 100mm copper | Limited or none |
| Power source | USB-C rechargeable lithium | Disposable 9V or AAA |
| Screen | Backlit LCD with depth in cm and signal % | Beeps and a few LEDs |
Swipe left for steps 2 and 3
Hold the scanner flat on the wall and press the wood button. Wait for Auto Cal OK and a green ring.
Move it sideways across the wall. The signal bar climbs and the ring turns yellow at the stud edge.
When the ring turns red, push your pencil through the center hole. Drill there.
I use the WD-01 on jobs almost every day. For around $32, it has been one of my better tool purchases. Wood, cable, and metal modes all give steady, repeatable readings without hauling around a pricier scanner.
I am literally buying this black-and-yellow digital wall detector for family members this Christmas because I like mine so much. It is useful, easy to understand, and way better than guessing where studs are.
When the ring turns green, I know I am lined up correctly. The LCD shows Edge or Center, and the yellow and red stages help narrow it down. Once centered, I can mark directly through the positioning hole.
I upgraded because my old stud finder could not check for electrical lines. This one has Wooden, Cable, and Metal detection buttons right on the front, so I can locate studs and check for live AC wiring before drilling.
The usability and detailed display are worth paying a little more for. The backlit screen shows depth in centimeters, battery level, signal percentage, and Edge or Center. The tri-color ring around the marking hole is especially helpful.
This handheld scanner has worked consistently for wood studs, metal pipes or rebar, and live cables. I tested the same areas several times and got matching results instead of random false positives all over the wall.
The visual target bar is excellent. As I move across the wall, the LCD bar and illuminated ring narrow down the stud edge, then show the center. It is much easier to follow than a basic blinking stud finder.
Bought this rechargeable wall scanner about five months ago and it still works great. I have used it for shelves, curtain rods, and a TV mount. The internal lithium battery continues to hold a charge really well.
I bought this to anchor a heavy bookshelf into drywall without drilling into a live wire. The two mode buttons are simple, and once it identifies the center, the hole lets you put your pencil mark in the right spot.
My cheap finder had me drilling useless holes everywhere. This one confirms Auto Cal OK before scanning and gives a clear Center crosshair when I am lined up. My last set of wall anchors went in exactly where intended.
$59.99 $119.99 Free Tracked Shipping (5–7 Days) Included
In Stock – Free 5–7 Day US Shipping · 30-Day Risk-Free Trial.
Yes. Press the right-hand button (I-beam and lightning icon) for metal and AC mode. A lightning icon appears on the screen when it picks up energized 110V to 230V cable, up to about 50mm deep.
Wood studs read up to 20mm in Exact mode and 38mm in Deep mode. Steel reads up to 120mm, copper up to 100mm, and live AC wire up to 50mm.
Slide the scanner until the light ring turns red and the screen's bar graph closes on center, then put your pencil tip through the 14mm hole in the middle of the tool and mark the wall.
No disposable batteries. It has a built-in 300mAh lithium battery that charges with the included USB-A to USB-C cable, and it auto-shuts off after five minutes.
Yes. One press mutes the buzzer, and the tri-color ring and LCD screen keep showing edge and center.
You have 30 days to test it on your own walls. If it doesn't find stud centers faster and more accurately than the finder you have now, send it back for a full refund.